ICT Sine Wave Inverter
IP Address:
Firmware: v1.04


Reset Communications
This will reset the Ethernet Communications port on the Inverter without interrupting AC power to the output terminals.
Current settings are maintained.

Restore Factory Default Settings
This will restore ALL settings to the original factory default values, including the password.
Remote communications may be lost.
On-site reconfiguration may be required.

To reset only the network settings and password to the original default values, press and hold the Reset button on the Inverter for at least 20 seconds.

Send Test E-mail
This will send a test e-mail using the settings on the E-mail Setup page.

Ping Diagnostics Tool
Use this tool to verify connectivity to any network device.

Host or IP address: